Warnings Regarding Installation - Niko 10-10X Mode D'emploi

Extension module dimensions
Reference code Bell push buttons
10-112-01
10-114-01
10-116-01
10-118-01
10-120-01
Other versions available upon request.

7. WARNINGS REGARDING INSTALLATION

- The installation should be carried out by a registered installer and in compliance with
the statutory regulations.
- This manual should be presented to the user. It should be included in the electrical
installation file, and it should be passed on to any new owners. Additional copies are
available on the Niko website or via the Niko support service. The latest manual for this
product is available on the Niko website at any time.
- During installation, the following should be taken into account (non-exhaustive list):
- the statutory laws, standards and regulations.
- the technology currently available at the time of installation.
- this manual, which only states general regulations and should therefore be read within
the scope of each specific installation.
- the rules of proper workmanship.
This product complies with all of the relevant European guidelines and regulations.
If applicable, you can find the EC declaration of conformity regarding this product at
www.niko.eu.
8. NIKO SUPPORT
In case of doubt or for the specific exchange procedure in case of a possible defect,
contact the Niko support service in Belgium at +32 3 778 90 80 or your wholesaler/
installer. Contact details and more information can be found at www.niko.eu under the
"Help and advice" section.
EN
10-10X / 10-11X(-01) / 10-12X(-01)
12
14
16
18
20
Columns of bell
push buttons
2
2
2
2
2
H (mm) W (mm)
128 135
147 135
166 135
185 135
204 135
D (mm)
20
20
20
20
20
35