Cleaning And Care - Peaq PPA401BT-B Mode D'emploi

All manuals and user guides at all-guides.com
ENGLISH
Audio input (AUX)
Attention:
Before you connect your external
player (for example an MP3 player),
refer to its user guide regarding safety
instructions and use with other de-
vices.
1. Connect the stereo cable to the
AUX jack.
2. Insert the other end of the cable
into the headphone or LINEOUT
jack of the external device.
Note:
• Disconnect the Bluetooth
tion with audio sources before con-
necting an external device via AUX.
• Switch the external player on and
turn its volume to zero.
• Turn the speaker system on and
regulate the volumes of both de-
vices.
Powerbank -
Charging a mobile
device
1. Connect the USB cable to the
USB port. Connect the other end
o the cable to the mobile device to
be charged.
2. After fully charged, the indicator
keeps on.
28
_PPA401BT-B_190412_V02_HR.indb 28
Note:
If the charging status of the power-
bank is too low during charging, the
charging process ends. Recharge the
powerbank by following "Charging
the battery".
IPX7 - Protection
against rain, splashing
and accidental
submersion
The product is protected from ac-
cidental immersion in water with a
connec-
®
depth up to 1m for up to 30 minutes.
Note:
• Protection only when the water re-
sistant cover is correctly closed.
• Only in Bluetooth

Cleaning and care

• Switch off the device before cleaning.
• Clean the device with a soft, damp
cloth and a mild cleaning agent. Fin-
ish by wiping it with a dry cloth.
• Do not use alcohol, acetone, ben-
zene, scouring cleansers etc. to
clean the device. Do not use hard
brushes or metal objects.
mode
®
12/4/19 3:52 pm