Replacement Parts - Omega Lift Equipment 92030 Mode D'emploi

OPERATIOn
Follow the vehicle manufacturers recommended removal and installation procedures for tire, wheel or hub.
After the tire/wheel assembly has been loosened from the hub or axle and is ready to be removed, position the tire cart
under the tire to be removed. Adjust cart position such that the tire/wheel assembly will balance between rollers without
falling.
Loading the Tire Cart
!
WARNING never load this device beyond rated capacity!
!
WARNING never use the Tire Cart as a wheel pulling device. Before
transporting wheel assembly, ensure that it is free from the hub or
drum assembly and balanced between the rollers.
When the weight of the loosened tire and wheel assembly is supported by
the Tire Cart, carefully roll the cart away from the drum or axle.
Always use both hands to control tire and Tire Cart!
Transporting the Loaded Tire Cart
1. Ensure that tire is properly placed on the rollers.
2. When wheel assembly has cleared the hub or the axle, push or pull to
desired location. Walk slowly, exercize caution and look ahead to avoid
obstacles while using both hands to control the tire and the tire cart.

REPLACEMEnT PARTS

Not all components of the OmegaTire Cart are replacement items, but are illustrated as a convenient reference of
location and position in the assembly sequence. When ordering parts, give model number, parts number and parts
description. Call or write for current pricing: SFA Companies, Inc. 10939 N. Pomona Ave. Kansas City, MO 64153
E-mail: sales@omegalift.com Phone: (888) 332-6419 Fax: (816) 891-6599
Item Part no.
1 92030-1
2 92030-2
3 92030-3
4 92030-4
5 92030-5
6 92030-6
Figure 2 - Parts Illustration for Tire Cart
3
Figure 1 - Always use both hands
Description
Handle Assembly
Roller Assembly
L Roller Frame
R Roller Frame
Wheel Assembly
Frame Hardware Kit
Qty
1
2
1
1
2
1