Placing The Batteries - Domo DO9150W Mode D'emploi

www.domo-elektro.be
1. Tare
2. 0-indication
3. Symbol: weight, water and milk
4. Minus indication
5. Indication weight (g or lb:oz)
6. Indication volume (ml or fl'oz)

PLACING THE BATTERIES

Open the lid of the battery compartment at the bottom of your scale.
Place 2 x 1.5V AAA batteries in the compartment, with the plus side at the + sign.
First place the flat side of the battery against the spring and then push the other side
down.
WEIGHING
Wegen
1. Place the scale on a stable and flat surface.
2. Press the on/off button,
3. Make sure that the scale is set to weight mode, not volume mode. If this is not the
case, press the MODE button until the weighing symbol is displayed.
4. Place the item on the weighing platform. You can now read the weight from the
display.
5. If nothing is being weighed for 2 minutes, or if there is no other activity during
this period, the scale will automatically switch off. You can also switch off the
scale by pressing the on/off button.
ZERO OR TARE (T) FUNCTION
You can weigh different items consecutively without removing any items from the
scale.
1. Place the first item onto the weighing platform and read the weight.
2. Press the ZERO button, so that the display indicates «0». The scale could also
first display «----», followed by «0».
3. Now place the next item onto the weighing platform to read the weight of this
item.
4. If at this point you press the ZERO button again, the scale will display the total
weight of all ingredients on the scale.
All manuals and user guides at all-guides.com
Volume Wasser
to turn on the scale.
ZERO
23
DO9150W
Volume Milch