98
Care and cleaning
4. To clean the fluff filter: Remove filter
from filter housing push the pressure
points on the sides and pull the filter
frame up and out of the housing. Re-
move fluff from the fluff filter with a
moist hand.
5. Use a moist hand to remove the fluff
from the filter in the base .
If necessary pull out and clean the filter
with warm water using a wiper or brush.
Clean the inside of the door, the fluff fil-
ter chamber and the rubber seals of fluff.
6. Insert the fluff filter into the base a . In-
sert the second fluff filter into the filter
housing (it has to audibly lock) and slide
it inside the filter chamber b . Close the
door in plinth. Note: If the fluff filter is
not inserted in the filter housing, the fil-
ter housing cannot be slide into the ap-
pliance base.
All manuals and user guides at all-guides.com
a
b
2
1