Craftsman 919.724130 Mode D'emploi page 17

All manuals and user guides at all-guides.com
To Replace Regulator
1. Release all air pressure from air
tank. See "To Drain Tank" in the
Maintenance section.
2. Unplug unit.
3. Using an adjustable wrench
remove the outlet pressure
gauge and quick connect from
the regulator.
Regulator
4. Remove the regulator.
5. Apply pipe sealant tape to the
nipple on the standpipe.
6.
NOTE: Arrow indicates flow of
Outlet
air. Make sure it is pointing in the
Pressure
direction of air flow.
Gauge
Quick
Connect
7.
8.
Nipple
17 - ENG
Assemble the regulator and
orient as shown.
Regulator
Regulator
Arrow
Reapply pipe sealant to outlet
pressure gauge and quick
connect.
Reassemble outlet pressure
gauge and quick connect. Orient
outlet pressure gauge to read
correctly. Tighten connect with
wrench.
A08394