Michelin 009552 Notice D'utilisation page 8

Study, understand, and follow all instructions provided with and on this device. Do not exceed rated capacity. This is a lifting device only. After
lifting, immediately transfer the load to appropriately rated jack stands. Never work on, under, or around a load supported by this device. Use
only on hard, level surfaces capable of supporting the load marked on the equipment. Do not move or dolly loads with this device. Failure to
heed this warning may result in personal injury and/or property damage.
To avoid any risk of being crushed or sustaining other injuries: NEVER work on, under or around a load supported only by a jack. ALWAYS use
adequately rated jack stands. If the generated efforts exceed 25kg, the effort shall be lowered by additional person.
Be sure all tools and personnel are clear before lowering load. No alterations shall be made to this device. Only attachments and/or adaptors
supplied by the manufacturer shall be used. Only lift the vehicle using the jacking points specified by the vehicle manufacturer.
This product should not be used in difficult conditions (eg extreme climates, applications in gel, strong magnetic fields). Or during an operation
subject to special rules (eg potentially explosive atmospheres, mines). Or duringThe lifetime of the product is 5 years. It is forbidden to use this
product to lift people. It is forbidden to handle loads, whose nature could lead to dangerous situations (such as molten metals, acids, radiating
materials, especially the fragile loads). If the product is out of service it must be destroyed. The product should not be in direct contact with
food. The product should not be used on vessels. Do not use in a potentially explosive atmosphere. Do not use in strong wind. Do not use in rain.
Do not use in a dusty environment.
The jack must be used within the following operating limits: temperature between -20°C and +50°C.
It is necessary that the operator can monitor the hoist and the load at every movement. It is not allowed to work under the load lifted until
it is secured with appropriate means. All necessary information concerning the formation and the forces of pumping and translation must be
provided to the operator.
If the jack is jammed in the lifting position with a load, you must take all security precautions such as using another jack; lift the load higher to
free the jammed jack, then lower it with the second jack.
Check regularly the markings if they are identical to the initial marking. The jacks shall be maintained and repaired to manufacturer's
instructions. The maintenance and the repairs must be performed by qualified personnel. No modifications that may affect the jack's
compliance with safety standards may be made.
All manuals and user guides at all-guides.com
WARNING !
WARNING !
SAFETY MESSAGE !
WARNING !
EN
8