Technical Support - D-Link GO-SW-5G Guide D'installation

TROUBLESHOOTING
SETUP AND CONFIGURATION PROBLEMS
1. WHAT TO DO IF THE POWER LED IS NOT LIT UP?
Check if the power adapter is properly connected to a wall socket and the back of the
GO-SW-5G & 8G .
2. WHAT TO DO IF A CONNECTED DEVICE IS NOT DETECTED?
First check if the Port LED is flashing. If the Port LED is not illuminated, try connecting the device
using a different LAN cable.

TECHNICAL SUPPORT

4
All manuals and user guides at all-guides.com
GO-SW-5G & 8G