Description Of A Sedna Transmitter, Standard; Battery Indicator - Tyro Musca Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

3. Description of a Sedna transmitter, standard

Horizontal key block
In the standard configuration the function keys ▲&▼, ◄&► are blocked so that only one of each pair can be used at a time.

Battery indicator

The new Sedna transmitters have 2 LEDs: one for the signal status and one battery indicator LED. The battery indicator LED flashes red when
the battery is almost empty. Older Sedna transmitters have only one LED. It flashes green more slowly during transmission when the battery
needs changing, it is between the function keys.
Replacing the battery of the Sedna transmitters
Loosen the screws on the back of the transmitter and carefully open the casing.
Replace the battery (9V block battery, Varta Alkaline) and close the casing.
Make sure that the flat cable is does not kink and that you do not over tighten the screws.
Combining hand-held transmitters
The Sedna 2F and 4F and the Musca 2F and 4F can be combined with each other on one receiver. The Musca 6F cannot be used with the
aforementioned products on one receiver.
Publisher:
Tyro Remotes, 08/2016
All manuals and user guides at all-guides.com
Transmitter elements
1.
Transmission indicator (green LED)
LED flashes for every signal sent
This LED flashes more slowly when the battery is almost empty
2.
Battery indicator (red LED)
This LED flashes when the battery is almost empty
3.
Stop button
Standard passive version
Controlled by pulse, normally open
Can also be used if the transmitter is off and the receiver is on
4.
Function keys
These keys control the functions of the system
Can be executed as pulse or flip/flop (key hold-down function)
5.
ON-button
Keep pressed down for 2 seconds, transmitter active and receiver active
6.
OFF-button
Immediately switches off the transmitter and receiver
Different versions
1a.
Sedna 2F
2 function keys
1 stop button
1b.
Sedna 4F
4 function keys
1 stop button
Revision number:
4042.V1.3
Manufacturer: Tyro Remotes
Bedrijvenpark Twente 1b, 7602 KA Almelo
9

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Sedna

Table des Matières