Panasonic WV-CS570/G Mode D'emploi page 46

5. Move the cursor to COARSE with the joystick.
** SYNC **
V PHASE
COARSE
FINE
RET
6. Match the vertical phases for both video output sig-
nals as closely as possible with the joystick. The
coarse adjustment can be performed in steps of
22.5 degrees (16 steps) with the joystick.
1 (1 - - - 16): 0 degrees
2 (1 - - - 16): 22.5 degrees
16 (1 - - - 16): 337.5 degrees
Note:
After the 16th step, the adjustment level returns
to the first step.
7. Move the cursor to FINE by using the joystick.
** SYNC **
V PHASE
COARSE
FINE
RET
8. Match the vertical phase for both video output sig-
nals as closely as possible with the joystick.
** SYNC **
V PHASE
COARSE
FINE
RET
** SYNC **
V PHASE
COARSE
FINE
RET
1(1--16)
•|•••••••
- +
1(1--16)
•|•••••••
- +
4(1--16)
••••••|••
- +
1(1--16)
•|•••••••
- +
Notes:
• When the "|" cursor reaches the "+" end, it jumps
back to "–". At the same time, COARSE is incre-
mented by one step to enable a continuous
adjustment. The reverse takes place when the "|"
cursor reaches the "–" end.
• When the joystick is kept at the right or left for
one second or more, the "|" cursor moves quick-
ly.
• To reset COARSE and FINE to the preset values,
press the F3 button of WV-CU650. For WV-RM70,
press the right and left switches simultaneously.
COARSE is preset to zero-crossing of the AC line
phase.
• If the AC line phase contains spike noise, etc.,
the vertical phase of the video output signal may
be disturbed.
G White Balance (WHITE BAL)
(1) Auto-Tracing White Balance Mode (ATW1/ATW2)
1. Move the cursor to WHITE BAL and select ATW1
with the joystick. The white balance of the camera is
automatically adjusted.
CAMERA ID
ALC/MANUAL
SHUTTER
AGC
SENS UP
SYNC
WHITE BAL
MOTION DET
AF MODE
RET
2. For fine adjustment of ATW1/ATW2, press the CAM
(SET) button. The ATW1/ATW2 fine adjustment
menu appears on the monitor screen.
R
B
RET
3. Move the cursor to RET with the joystick and press
the CAM (SET) button to return to the SET UP menu.
-46-
** SET UP **
OFF
ALC
AUTO
ON(MID)
OFF
INT
ATW1
OFF
AUTO L
SPECIAL2
** ATW1 **
••••|••••
- +
••••|••••
- +