Panasonic WV-CS570/G Mode D'emploi page 38

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

** AREA TITLE(USER) **
1*
NORTH
2
3
EAST
4
SOUTH-EAST
5
SOUTH
6
SOUTH-WEST
7
8
NORTH-WEST
RET
RESET
1. To select a camera direction, move the cursor to the
desired number, and press the CAM (SET) button.
The direction menu of the selected number appears.
2. Adjust PAN/TILT, ZOOM/FOCUS and display the
position in the same way as AREA TITLE, DIREC-
TION (NESW). See page 37.
** DIRECTION(USER) 1 **
PAN/TILT
ZOOM/FOCUS
RET
DEL
3. To add a user-customized title, move the cursor to
the title of the desired number, and press the CAM
(SET) button. The AREA TITLE menu of the selected
number appears.
Area Title Editing
1. Move the cursor to the desired character in the
character field with the joystick, and press the CAM
(SET) button.
2. The selected character appears in the editing field
and the blinking cursor moves one position to the
right.
AREA TITLE 1*
0123456789
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
().,'":;&#!?=
+-*/%$ÄÜÖÆÑÅ
SPACE
................
3. Repeat steps 1 and 2 until one area title is complet-
ed.
4. Move the cursor to POSI O, and press the CAM
(SET) button. The area title appears on the monitor
screen. If needed, change the display position with
the joystick, and press the MON (ESC) button.
→PUSH SET
→PUSH SET
+
NORTH
POSI RET RESET
To Quit Editing
• To return to the AREA TITLE menu, move the cursor
to RET, and press the CAM (SET) button.
• To cancel one area title, move the cursor to RESET
in the AREA TITLE menu, and press the CAM (SET)
button.
• To return to the SPECIAL 1 menu, move the cursor
to RET, and press the CAM (SET) button.
• To erase all the area titles, move the cursor to
RESET in the AREA TITLE (USER) selection menu,
and press the CAM (SET) button.
Notes:
• An area title appears under the camera ID if both
are set in the same position. If the setting is dif-
ferent, they appear in the area title position.
• In case of sharing a common subject in a scene
of other camera number, the nearest area title
appears while the camera direction deviates
within 45 ° from the set position. If two or more
area numbers are set in the same position, the
title of the highest number appears.
G Patrol-learn and Patrol Play (PATROL)
A routine of manual operations can be stored for 1
minute at the maximum and reproduced repetitively.
PATROL
PRIVACY ZONE
PROPO.P/T
AREA TITLE
PATROL
ALARM IN/OUT
CLEANING
EL-ZOOM
PRESET ALM
IMAGE HOLD
TILT ANGLE
RET
1. Set the following parameters for the patrol-learn
starting position. These parameters are stored when
the patrol-learn mode starts.
• PAN/TILT/ZOOM/FOCUS
• IRIS
• SHUTTER
• AGC
• SENS UP
• WHITE BALANCE
• IMAGE HOLD
• AREA TITLE
-38-
FLOOR 1
NORTH
** SPECIAL 1 **
OFF
ON
ON(USER)
PLAY
OFF
ON
OFF
OFF

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Wv-cs574e

Table des Matières