Panasonic WV-CS570/G Mode D'emploi page 41

G Cleaning (CLEANING)
With CLEANING in the ON position, the camera's built-
in electromechanical contacts are cleaned at regular
intervals (approx. every 7 days).
A dry contact adversely affects picture quality and
motors operation.
1. Move the cursor to CLEANING and select ON or
OFF with the joystick.
** SPECIAL 1 **
PRIVACY ZONE
PROPO.P/T
AREA TITLE
PATROL
ALARM IN/OUT
CLEANING
EL-ZOOM
PRESET ALM
IMAGE HOLD
TILT ANGLE
RET
ON: The contacts are cleaned for approx. 1 minute.
"CLEANING" disappears when the cleaning
process is completed.
OFF: No contact cleaning.
Note:
To download or upload preset data to the system
controller, set the cleaning function to "OFF". If
the cleaning function is activated during the
uploading or downloading process, the upload-
ing or downloading fails.
G Electronic Zoom (EL-ZOOM)
The electronic zoom magnifies a scene 10-fold. With a
22-fold optical zoom lens, the camera is capable of
220-fold zoom.
1. Move the cursor to EL-ZOOM and select ON or OFF
with the joystick, and then press the CAM (SET) but-
ton.
** SPECIAL 1 **
PRIVACY ZONE
PROPO.P/T
AREA TITLE
PATROL
ALARM IN/OUT
CLEANING
EL-ZOOM
PRESET ALM
IMAGE HOLD
TILT ANGLE
RET
OFF
ON
ON(USER)
STOP
ON
ON
OFF
OFF
0°
CLEANING
OFF
ON
ON(USER)
STOP
ON
ON
OFF
OFF
0°
ON: 10 - fold electronic zoom is available with the
ZOOM switch on the controller.
OFF: The electronic zoom function is not used.
Notes:
• A scene magnified by the electronic zoom func-
tion may be inferior in picture quality to a non-
magnified one.
• The electronic zoom does not function in the pre-
set position setting mode.
• When trying to set preset positions directly from
the WV-CU360 System Controller while ON is set
for the electronic zoom function and the dis-
played scene is magnified at more than x22, the
INHIBIT indication will be displayed. In this case,
you need to set the electronic zoom function
temporarily to OFF.
G Preset Alarm (PRESET ALM)
An alarm output is sent when the camera moves to the
designated position depending on the mode.
1. Move the cursor to PRESET ALM and select ON or
OFF.
PRIVACY ZONE
PROPO.P/T
AREA TITLE
PATROL
ALARM IN/OUT
CLEANING
EL-ZOOM
PRESET ALM
IMAGE HOLD
TILT ANGLE
RET
ON: Alarm signals are output in the following cases.
• When a preset positioning sequence is complet-
ed while AUTO MODE is set to SEQ.
• When a preset positioning sequence is complet-
ed while AUTO MODE is set to SORT.
• When the self-return function has returned the
camera to its home position.
• Positioning is completed for a position request
command.
• Positioning to the designated point is completed
for ALARM IN/OUT.
• When positioning to the starting point is complet-
ed while AUTO MODE is set to AUTO PAN.
• When positioning to the starting point is complet-
ed while PATROL is set to PLAY.
OFF: Alarm signals are not output.
Notes:
• Select OFF when the camera downloads or
uploads the preset data.
• When selecting "ON", set "AUTO" for "ALARM
DATA" on the RS485 SETUP menu (page 19).
-41-
** SPECIAL 1 **
OFF
ON
ON(USER)
STOP
OFF
ON
ON
OFF
0°