installing the dishwasher
STEP 4 CHECK THE ELECTRICAL REQUIREMENTS AND CAUTIONS
The electrical requirements for the dishwasher are as follows:
•
In the United States, install in accordance with the National Electric Code/State and Municipal codes
and/or local codes.
•
In Canada, install in accordance with the Canadian Electric Code C22.1-latest edition/Provincial and
Municipal codes and/or local codes.
•
For cable direct connections.
-
Use fl exible, armored or non-metallic sheathed, copper wire with a grounding wire that meets the
wiring requirements for your local codes and ordinances.
-
Use the strain relief method provided with the wiring junction box or install a U.L.-listed/CSA-certifi ed
clamp connector to the wiring junction box. If using conduit, use a U.L.-listed/CSA-certifi ed conduit
connector.
<Figure 3>
Hot Water
Hot Water
Supply Line
Supply Line
Power cable channel
Power cable channel
10_ installing the dishwasher
DW9900M-00183B-01_EN.indd Sec3:10
DW9900M-00183B-01_EN.indd Sec3:10
2½-3½ in.
2½-3½ in.
(64-89 mm)
(64-89 mm)
Dishwasher bottom
12/27/2016 6:22:49 PM
12/27/2016 6:22:49 PM