LENCO PDR-011 Mode D'emploi page 10

• Date
DAB options
Press and hold the "Menu/Info" key to display the menu and scroll through the available options
using the <or> key and confirm by pressing "Enter":
• Full search: allows you to perform a new scan of the DAB stations.
If no station is found the display will show "No DAB station". In this case, check that the
headphones are inserted correctly and/or scan from another location.
• Manual tuning: allows you to perform a manual scan based on the selected frequency.
Scroll through the frequencies using the <or> key. Select the desired frequency with the
"Enter" key, the signal strength and station information will be shown. Press the "Enter" key
again to confirm the selection and add the stations to the list.
•
DRC: the DRC option adds or removes a degree of compensation for differences in the
dynamic range between sound levels. The radio station has to support the DRC function.
• Using the "Next"/"Previous" keys, it is possible to select between deactivated DRC (no
compensation applied), low DRC (average compensation applied) or high DRC (maximum
compensation applied) and confirm by pressing "Enter". The asterisk indicates the current
setting.
• Delete (prune): the option allows you to delete stations that are no longer receivable from
the list (only stations where the signal quality is 0 will be deleted). After opening the
"Delete" function, select "Yes" with the <or> keys and confirm by pressing "Enter".
• System: see chapter "product setting"
NOTE: in case that DAB reception is not good, it is recommended to move/use the product
outdoors to improve reception.
FM MODE
Press the "Mode" button repeatedly until the FM mode is selected.
When the FM mode is first started, the device will tune in to the first frequency of the FM scale
(87.50MHz). Press the <or> button to scroll through the FM frequencies.
Press and hold the <or> button to automatically search for the next available FM station.
You can make a complete scan of the FM band by automatically saving the first 30 stations
available in the presets by holding down the "Scan" button.
RDS information
Radio Data System (RDS) allows FM stations to transmit additional information.
When you tune to an FM radio station that transmits RDS signals, the station name is displayed.
10