Functions; Programming The Timer - Pinguino PAC L90 Mode D'emploi

AIR-CONDITIONING MODE
• Press the button to turn the appliance on.
• A beep indicates that the air-conditioning unit is on and the
symbol flashes on the display.
• Press the MODE button a number of times until the air-conditio-
ning symbol appears on the display.
• Now set the temperature using the
• To select fan speed, press the "SPEED" button repeatedly until the
required fan speed is selected (automatic, high, medium, low).
NB: in air-conditioning mode, the appliance automatically removes
excess moisture from the atmosphere.
FAN MODE WITH AIR FILTRATION
In humid but not particularly hot days, the fan function alone may
be adequate.
• Press the button. A beep indicates that the air-conditioning
unit is on and the
• Press the MODE button a number of times until the fan symbol
appears on the display.
• Once purifying mode has been selected, press the SPEED button
until the required speed is reached (low, medium, high).

PROGRAMMING THE TIMER

The timer can be used to delay appliance start up or shut down.
This avoids wasting electricity by optimising operating periods.
Programming shut-down
• With the air-conditioning unit on, press the TIMER button. The time
is displayed and the "h" symbol flashes. Set the time when you
want the appliance to go off using the
minutes to 24 hours).
• Press the TIMER button again to confirm the selection. A count-
down of the time left is displayed.
• At the end of the set time the appliance switches off automatical-
ly. During the first ten hours, you can select half hour intervals. For
times greater than ten hours, one hour intervals can be selected.
• To cancel the set time, press the TIMER button again.You will hear
a beep.
Programming start-up
• With the air-conditioning unit off, press the TIMER button. The time
is displayed and the "h" symbol flashes. Set the time when you
want the appliance to come on using the
minutes to 24 hours). During the first ten hours, you can select half
hour intervals. For times greater than ten hours, one hour intervals
can be selected.
• Press the TIMER button again to confirm the selection.
• At the end of the set time the appliance switches on automati-
cally.
• To cancel the set time, press the TIMER button again.You will hear
a beep.
12
All manuals and user guides at all-guides.com

Functions

buttons.
symbol flashes on the display.
buttons (from 30
buttons (from 30
F
75
18