CLAS OP 1502 Mode D'emploi page 12

OP 1502
1/2" D. IMPACT WRENCH 1492Nm DOUBLE HAMMER
Attention! Use only sockets specially designed for use with this tool.
6. Check the direction of rotation briefl y before use.
Three-point side: Tightening - One-point side: Loosening.
7. Torque adjustment: The tightening torque consists of 3 steps (small to large circles). The
loosening torque has only one adjustment.
• DO NOT force the tool in any way to increase its working power
• DO NOT idle the tool for an extended period of time.
• Adjust the air compressor regulator to 6.3bar. Gently pull the trigger.
Attention! Disconnect the key from the network before changing accessories or repairing
damaged parts. Use only authentic parts. Unauthorized parts can be dangerous.
1. Lubricate the key every day with a few drops of pneumatic oil
2. DO NOT use worn or damaged sockets.
3. The power loss or erratic use may be due to the following factors:
a) Leak in the air network. Humidity or restriction in the air pipe. Incorrect size or type
of connectors. Check the air network and follow the instructions.
b) Dust / impurity deposits in the key can also reduce performance. If your model has
a strainer, clean it.
4. When not in use, disconnect, clean the key and store it in a safe, dry place out of reach of
children.