auna Amp-5100 BT Mode D'emploi page 17

BT OPERATION
External devices which have a built-in BT feature can be connected to this
amplifier wirelessly to play through the amplifier's speakers. If your amp
is connected to speakers, you will hear audible tones which will help for
connecting.
1. Press the INPUT button on the device or on the remote control until the
BT mode is set.
2. Turn on BT on the external device.
3. Search for available BT devices. Make sure that you are within the
reception range. Select "Amp-5100 BT" from the list of available devices.
4. If BT pairing is successful, you have established a BT connection.
5. You can now play music on the external device.
TROUBLESHOOTING
Problem
No sound
Feedback
Possible Reason
Sound source or speakers
may not be connected
properly.
Master volume control
may be set to a minimum.
The speaker's wire might
be the wrong impedance.
The amplifier is shutting
down or powering off
Microphone and speakers
are to close together
Solution
Check all connections.
Adjust the volume control
to a higher setting.
Make sure that the
speakers that you have
connected to the amp are
matching in impedance.
Turn the amplifier off and
let it cool, make sure that
the amplifier is properly
ventilated, and then turn
it back on..
Reposition the
microphone and speakers
EN
17