Midi Mode; Midi Program Change Table; Setting The Midi Program Change Table - Yamaha REV100 Manuel D'instructions

4. MIDI Mode

A MIDI IN connection is provided so that the REV100 effects programs can be selected and modified using MIDI messages.

MIDI Program Change Table

The REV100 has a MIDI Program Change table in memory which you can edit to re-order the effects programs. You can create
a table of program numbers which correspond to MIDI Program Change numbers 1 to 99. When the REV100 receives a MIDI
Program Change message, it will select the internal program number that corresponds to the MIDI number in the message. The
REV100 will ignore MIDI Program Change numbers 100 or greater.
The following table illustrates the correspondence between the MIDI Program Change numbers and the internal program numbers:
MIDI Program Number
1
2
3
...
99
100
...
128

Setting the MIDI Program Change Table

1. Press the MIDI key. The MIDI indicator dot will light up on the 7-segment LED:
MIDI INT
When the MIDI indicator is lit, the 7-segment LED displays the current MIDI Program Change number.
2. Select another MIDI Program Change number by pressing the
3. To select the internal program numbers, press the MIDI key again. The MIDI indicator dot is switched off and the INT
indicator dot will light up.
4. Modify the internal program number for the selected MIDI Program Change number by pressing the
5. To quit this mode, press and hold the MIDI key for approximately one second. The current indicator, either the MIDI indicator
or the INT indicator will switch off and the 7-segment LED will display the currently selected program number.
REV100 Program Number
10
5
22
...
1
ignored
INT indicator dot
MIDI indicator dot
or keys.
MIDI Mode
or keys.
7