Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
4. Mount the bracket at the wall stud locations using (2)
1½" (38 mm) screws (provided). Ensure that the
bracket is level.
measurements in inches (mm)
Adjustable
mount holes
3½" (89)
3½" (89)
3½" (89)
5. See "Hanging the Chimney Hood" in the Installation
Manual before securing the Telescopic Chimney
Extension.
6. Insert the complete duct cover at an angle and swivel
toward the wall.
2
English 2
1
7. Carefully pull the top part of the extension upwards.
Screw the left and right sides of the extension to the
mounting bracket with the supplied stainless screws.
8. From inside of hood, screw the supplied 5/8" (16 mm)
sheet metal screws through the holes on each side and
along the front into bottom of the extension. Screw
quantity is dependent on hood size.
2
1
Publicité
Table des Matières
