Femi job Serie Manuel D'utilisation page 34

PERMITTED USE
The machine has been designed and built to perform operations involving the removal of material
(grinding or sharpening tools) and/or cleaning procedures for any type of metal or similar materials with
the workpiece being held in the hands.
FORBIDDEN USE
IT is forbidden to:
• OPERATE ON NON-METALS, ORGANIC MATERIALS AND/OR FOOD STUFFS.
• OPERATE ON MATERIALS WHICH MAY RELEASE TOXIC SUBSTANCES DURING THE WORK
PROCESS.
THIS MACHINE IS NOT SUITABLE FOR USE IN POTENTIALLY EXPLOSIVE
ENVIRONMENTS.
RESIDUAL RISKS
Friction or abrasion hazard
This risk is due to the presence of the rotating tool.
Precautions to be taken
• When working with the tool do not wear work gloves.
• Keep hands away from the work area.
• Never remove cutting residues or workpiece fragments when the tool is rotating.
Solid material ejection hazard
This risk is due to the presence of the rotating tool.
Precautions to be taken
• When working with the tool, always wear the necessary personal protective equipment: safety goggles,
safety shoes.
INFORMATION CONCERNING NOISE
The noise values indicated are emission levels and not necessarily safe operating levels. While there
is a correlation between emission levels and exposure levels, this cannot reliably be used to determine
whether or not further safety precautions are needed. Factors which infl uence the real level of a
worker's exposure include the duration of exposure, the characteristics of the working environment,
other sources of noise, for example the number of machines or operations being carried out in the near
vicinity. Furthermore, levels of safe exposure may be fi xed diff erently from one country to another. This
information does however help the machine user to better assess the hazards and risks.
IT IS ADVISABLE TO USE SUITABLE HEARING PROTECTION SUCH AS
EARMUFFS OR EAR PLUGS.
INFORMATION ON ELECTROMAGNETIC COMPATIBILITY
Electromagnetic emissions from the machine do not exceed the limits defi ned by the relative standards
for the envisaged conditions of use.
CHECK THAT THE POWER SUPPLY SYSTEM IS EQUIPPED WITH A
THERMOMAGNETIC CIRCUIT BREAKER TO PROTECT ALL CONDUCTORS
FROM SHORT CIRCUIT AND OVERLOADS
NEVER bring hands anywhere near the operating zone until the grinding wheel
has come to a complete standstill.
EN
USE
34