General Wiring Diagram - MaxLite MSF Serie Mode D'emploi

Operating Instructions
MaxLite LED Slim Flood Fixtures (200W & 300W)
®

General Wiring Diagram

CAUTION: Turn off electrical power at fuse or circuit breaker box before wiring fixture to the
power supply.
0-10V Dimmable Wiring:
1.) Connect the black fixture wire to the HOT LINE supply wire.
2.) Connect the white fixture wire to the NEUTRAL supply wire.
3.) Connect the green fixture wire to supply ground wire.
4.) Connect the purple fixture wire to the (V+) DIM wire.
5.) Connect the pink fixture wire to the (V-) DIM wire.
© Copyright 2022. MaxLite, Inc. All Rights Reserved.
12 York Ave, West Caldwell, NJ 07006 Tel: 800-555-5629 Fax: 973-244-7333 Email: info@maxlite.com
MSF Series
Page: 2
REV: 03/15/22