MaxLite MSF Serie Mode D'emploi page 5

Operating Instructions
MaxLite LED Slim Flood Fixtures (200W & 300W)
®
Installation & Operation – Optional Motion Sensor
1.) In order to install the HBE motion sensor, remove the KO plug on the right side of the driver compartment
cover. Install the sensor into the socket. Program the sensor according to the desired function (Fig. 9).
© Copyright 2022. MaxLite, Inc. All Rights Reserved.
12 York Ave, West Caldwell, NJ 07006 Tel: 800-555-5629 Fax: 973-244-7333 Email: info@maxlite.com
Socket
Induction Module
MSF Series
Page: 5
REV: 03/15/22