Operating Instructions
MaxLite LED Slim Flood Fixtures (200W & 300W)
®
Installation & Operation – 3-pin Receptacle
1.) If photocell function is required, install the photocell into the 3-pin socket on the back of the luminaire.
Otherwise, install a shorting cap into the socket (Fig. 6).
Photocell
Shorting cap
Socket
Lamp
Installation & Operation – Color Temperature (CCT)/Wattage Adjustment
1.) In order to adjust the color temperature (CCT), remove the screws from the driver compartment cover and
adjust the color temperature controller(s) to the desired CCT (Fig. 7).
2.) In order to adjust the wattage, remove the KO plug from the left side of the driver compartment cover, and
adjust the power controller to the desired wattage (Fig. 8).
© Copyright 2022. MaxLite, Inc. All Rights Reserved.
12 York Ave, West Caldwell, NJ 07006 Tel: 800-555-5629 Fax: 973-244-7333 Email: info@maxlite.com
3K
4K
5K
300W
200W
MSF Series
Page: 4
REV: 03/15/22