Mitsubishi Electric Mr.SLIM PEAD-A24AA Manuel D'installation page 9

8
[Fig. 8-12]
[Fig. 8-13]
A
[Fig. 8-14]
[Fig. 8-15]
All manuals and user guides at all-guides.com
8.4
B
A
1
1
A
2
Insert the minus screwdriver toward the
arrow pointed and wrench it to remove the
cover.
A flat screwdriver whose width of blade is
between 4 and 7mm (5/32 - 9/32inch)
must be used.
C D
A Thin-wall portion
B Bottom case
C Remote controller wire
D Conducting wire
A Screw (M4 x 30)
* When installing the lower case directly on the wall or the ceiling,
use wood screws.
1 Hang the cover to the upper hooks (2 places).
2 Mount the cover to the lower case
A Cross-section of upper hooks
9