Philips LFH9160 Manuel De L'utilisateur page 8

to troubleshoot and maintain LAN Docking
Stations in your network. See
comment to the LAN Docking Station
for more information about assigning comments.
3.3.2 Installation using the factory default
IP address
If your network does not have a DHCP server,
follow these steps to install a new LAN Docking
Station:
Connect the LAN Docking Station to the
1
main power supply with the included Philips
power supply.
Connect the LAN Docking Station to a free
2
network socket using the RJ45 network
cable.
Slide a Digital pocket Memo 9600 or 9620
3
into the docking slot of the LAN Docking
Station.
Press and hold the
4
button on the Digital Pocket Memo
MENU
simultaneously for 3 seconds. The LAN
Docking Station will be configured to use
the static IP address 192.168.109.1 (subnet
mask 255.255.255.0).
Configure the network connetion settings
5
of your PC to use a static IP address
like 192.168.109.xxx and subnet mask
255.255.255.0 for the network socket that is
used to connect the LAN Docking Station.
Open a Web browser on your PC and enter
6
http://192.168.109.1
Your user name and password is required.
7
Leave the
USER NAME
8
All manuals and user guides at all-guides.com
Assigning a
on page 16
and the
FUNCTION
in the address field
field empty and enter
‚administrator' in the
Change the IP address of the LAN Docking
8
Station according to your network policy.
See Assigning a static IP address
for more information.
Make any additional configuration changes as
9
you see fit. See Configuration
more information.
D Note
This procedure resets all configuration settings
of the LAN Docking Station to their factory
defaults.
Important
C
If installing several LAN Docking Stations,
be sure to change the IP address of the LAN
Docking Station before connecting the next one
to the network. Failure to do so will result in
IP address conflicts, making the configuration
interface of the LAN Docking Station
inaccessible.
field.
PASSWORD
on page 14
on page 9 for
User manual