Philips LFH9160 Manuel De L'utilisateur page 14

4.7.2 Assigning a static IP address
D Note
If you are installing the LAN Docking Station
for the first time, follow the instructions in the
chapter Installation on page 7.
E Tip
To display the current IP address assigned to a
LAN Docking Station and its MAC address, slide
a Digital Pocket Memo 9600 or 9620 into the
docking slot and press the
RIGHT SMART BUTTON
Memo simultaneously.
To assign a static IP address to the LAN
Docking Station, follow these steps:
Open the LAN Docking Station
1
configuration interface by entering its IP
address in your Web browser or using the
LAN Docking Station Administration
Check the
2
USE THE FOLLOWING IP
check box on the IP settings
SETTINGS
panel.
Enter the IP address you want to assign
3
to the LAN Docking Station into the
field.
ADDRESS
Enter the subnet mask for this IP address
4
into the
SUBNET MASK
Enter the IP address of your network
5
gateway into the
Enter the IP address of a DNS server on
6
your network into the
field. A DNS server is only required
SERVER
if you reference your FTP server using a
14
All manuals and user guides at all-guides.com
button and
MENU
on the Digital Pocket
Tool.
field.
field.
DEFAULT GATEWAY
PREFERRED DNS
domain name on the FTP settings panel
(see FTP settings
empty if you do not want to specify a DNS
server.
You can enter the IP address of another
7
DNS server into the
SERVER
only be used if the preferred DNS server is
not available. Leave the field empty if you
don't want to specify an alternate DNS
server.
Press the
8
the IP settings panel in order to save your
changes. The LAN Docking Station will
change its IP address immediately and will
attempt to use this static IP address every
time it is powered on.
IP
D Note
The IP address of the LAN Docking Station
is updated immediately, so its configuration
interface will no longer be accessible from the
old IP address.
on page 11). Leave the field
ALTERNATE DNS
field. This alternate DNS server will
button at the bottom of
SUBMIT
User manual