Accu-Turn 1400 Manuel De L'opérateur page 73

74
All manuals and user guides at all-guides.com
Installation Instructions
iii Installation procedures.
Wheel balancer:
Refer to the figure in section i to position the wheel
balancer correctly. If the wheel balancer is to be se-
cured, use fixing elements with a bolt shaft measuring
8 mm, quality 8.8 or above.
Storage hooks:
• Unpack the 4 threaded accessory supports and
disks.
• Refer to Figure iii-1. Mount the 4 threaded supports
and disks.
Stub shaft:
• Clean the stub shaft and the main shaft.
• Refer to Figure iii-2. Position the stub shaft on the
main shaft.
• Use the key supplied to tighten fully home.
Wheel guard:
• Refer to Figure iii-3. Bolt the wheel guard assembly
onto the shaft which projects at the back on the
right-hand side.
Cones:
• Place the cones in the accessory supports or in the
grooves on the weight tray.
Clamping devices:
• Place the clamping devices in the accessory sup-
ports.
Operator's Manual ACCU 1420