General Notes On Safety; General Safety Directions For Power Tools - Grizzly Tools AKS 2040-20 T Traduction De La Notice D'utilisation Originale

1 Caution!
2 Read and take note of the operating
manual belonging to the machine!
3 Do not expose the machine to the
rain. Do not allow the equipment to
become damp or operate it in a damp
environment.
4 Danger due to materials blown out of
machine!
5 Keep the equipment away from near-
by people.
6 Remove the battery from the device
before maintaining the device.
7 Danger of death by electrocution!
Keep at least 10m away from power
lines.
8 Wear safety goggles or a safety mask
9 Wear a safety helmet.
10 Wear ear protection..
11 Wear cut-protection gloves.
12 Wear cut-protection safety boots with
anti-slip soles.
Machines do not belong with do-
mestic waste.
Information of the guaranteed
acoustic power level L
A full tank will last for approx.
15 minutes of continuous operation
Symbols used in the instructions
Hazard symbols with informa-
tion on prevention of personal
injury and property damage.
Precaution symbol with information
on prevention of harm / damage.
Notice symbol with information on
how to handle the device properly.

General notes on safety

General Safety Directions for
Power Tools
in dB.
WA
Retain all safety directions and instruc-
tions for future use.
The term „power tool" in the warnings
refers to your mains-operated (corded)
power tool or battery-operated (cordless)
power tool.
Work area safety:
• Keep work area clean and well lit.
• Do not operate power tools in ex-
Before you do any work with the
cordless pruner, make yourself
familiar with all operating parts.
Practise using the saw (sawing
logs on a sawhorse) and get an
experienced user or a specialist to
explain to you the function of the
saw, the way of working, the tech-
niques of sawing and the personal
protection equipment.
If an accident or fault occurs during
operation, immediately switch off
the device and disconnect at the
plug. Treat injuries appropriately or
consult a doctor. For the correction
of faults, read the "Troubleshoot-
ing" chapter or contact our service
centre.
WARNING! Read all safety direc-
tions and instructions. Omis-
sions in the compliance with safety
directions and instructions can
cause electrical shock, fire and/or
severe injuries.
Cluttered or dark areas invite accidents.
plosive atmospheres, such as in the
GB
63