sylvac D300S V2 Manuel D'utilisation page 25

All manuals and user guides at all-guides.com
EXTxDELAYy:z
(x = 1 to 4)
(y = 1 to 3)
(z = 100 to 99999999 )
KEY0
KEY1
STO?x
lues recorded)
VIEWxy
#xx#+...
(xx : 1 to 64)
#xx#RES1
#xx#RES2
#xx#RES3
#xx#RES4
#xx#BAR
#xx#NUM
#xx#MAX
#xx#MIN
#xx#DEL
#xx#NOR
#xx#MM
#xx#IN
#xx#PRE?
tion
Introduction of a delay in [ms] between the execution of the
different functions of the external contact.
X = 1: switch 1
X = 2: switch 2
X = 3: Foot pe-
dal 1
X = 4: Foot Pe-
dal 2
Ex : « EXT3DELAY1 :1000 » introduction of a 1000ms delay
between the execution of function 1 and 2 of pedal 1.
Activates the keyboard and tactile screen
Locks the keyboard and tactile screen
-
Only works in static mode
Select the measure mode or the static mode
X = 1: measure mode
X = 2: displays the histogram (statistic mode)
X = 3: displays the chart on average (statistic mode)
X = 4: displays the chart on the range (static mode)
X = 5: displays the statistics table (statistics mode)
Ex : « VIEW2channel1 » displays the channel1 histogram.
All the following retro-commands are preceded by « #xx# ».
This means you must specify the channel on which the com-
mand is carried out.
cuted on all active channels.
Changes the resolution: 0.0001
Changes the resolution: 0.001
Changes the resolution: 001
Changes the resolution: 0.1
Selects the bargraph display mode
Selects the digital display mode
Selects the maximum measure mode
Selects the minimum measure mode
Selects the delta measure mode (max-min)
Selects the normal measure mode
Sets the measure unit in millimetres
Sets the measure unit in inches
Returns the Preset value
25
Z=9: Hold OFF
Z=10: Hold ON/
OFF
Y=1: delay 1 Z = time in ms
Y=2: delay 2 (min value = 100 ms)
Y=3: delay 3
-
E
-