List Of Instruments - sylvac D300S V2 Manuel D'utilisation

All manuals and user guides at all-guides.com
or on one channel.
Manual: pressing the external contact acts on one channel at a time and
selects the next channel.
Auto: pressing the external contact acts on all the channels at the same-
Remark:
in the System parameters --> Pedal I/O menu.

List of instruments

This menu allows display of all the instruments connected to the unit. The dif-
ferent instrument types are:
USB: the instruments connected using the USB cable (proximity-usb,
optoRS-usb, ...).
S_SCALE: the USB measurement axes
RS232: the instruments connected using an RS232 cable
Probe: the probes.
Remark: the "E" symbol appears if point by point correction is active.
BLE: Bluetooth instruments
RS485 Detection: activates the detection of a new RS485 module connec-
RS485 Refresh: searches for all the RS485 modules connected to the D300S
and makes them appear in the list of instruments.
RS485 Reset: deletes the RS485 modules present in the list of instruments.
18