The Tv Anywhere System; Installing The System - Marmitek TV ANYWHERE Guide Utilisateur

6. Frequently Asked Questions ______________________________________________ 16
7. Technical Specifications __________________________________________________ 18

1. ThE TV ANYWhERE SYSTEm

The TV Anywhere system includes a transmitter with built-in tuner and a receiver for antenna
signals and A/V signals. With the TV Anywhere system, you can transmit audio and video
signals throughout your house to a remote (2nd) TV, without additional coaxial cables. The
built-in tuner converts the antenna signal into a standard audio/video signal. This A/V signal
is transmitted by the unit on a 2.4 GHz or 5,8 GHz frequency (model dependend). The TV
Anywhere transmitter can be connected directly to your antenna wall socket. The receiver is
connected to the A/V input of your remote (2nd) Television.
Multisource and remote control
Additional A/V equipment can be connected to the transmitter as well (e.g.Set-Top Box, DVD
player or satellite receiver). The source can be selected with the remote control supplied,
even from another room. The supplied remote is a 6in1 universal remote and can be used
locally (for your connected TV) as well as for various other equipment (e.g. DVD, Set-Top Box,
satellite receiver, etc.) connected to the transmitter in another room. This remote control
is also used to select channels on the TV Anywhere. The TV Anywhere has a built-in IR
(infrared) extender to use your original IR remotes as well.

2. INSTAllING ThE SYSTEm

Attention: During set up, install the TV Anywhere transmitter and receiver in the
same room with a TV connected. After succesfull installation the receiver can be
placed to wherever you wish to connect your remote (2nd) TV.
2.1 Installing the transmitter without extra a/v equipment
1. Connect a coaxial cable [A] to your antenna wall socket.
2. C onnect a coaxial cable to the Antenna Input [3] of your TV
Anywhere transmitter.
3. S elect a channel using the Channel Selector slide switch [9] (see
page 2), e.g. C.
4. C onnect the large power adapter to the TV Anywhere transmitter [6].
5. Switch on the unit with the ON/OFF switch [7].
6. M ake sure the TV Anywhere transmitter is placed some distance
away from other equipement which may interfere. Do not place
the transmitter on top of your audio and/or video equipment.
7. Direct the flat antenna [8] at the receiver.

All manuals and user guides at all-guides.com
3
A
B
RADIO TV
© MARMITEK