Marmitek TV ANYWHERE Guide Utilisateur page 15

5. P ress the SOURCE and CHAN UP buttons (right button) at the front of the transmitter at
the same time.
6. The following text will appear on your screen:
CODE WXYZ ACCEPTED
7. Press "SET". The following text will appear on your screen:
PRESS [SET] AGAIN TO
CONFIRM
8. Press "SET" again.
9. The following text will appear on your screen (where WXYZ is the new code):
HANDSET CODE 0636
PRESS [SET] TO CHANGE
ANY OTHER KEY TO CONTINUE
10. T est the connection by pressing PROG+ or PROG-.
5.10 Resetting the configuration of the remote control
You can reset the remote control to its original configuration, as follows:
1. Press the SETUP button until the LED stays lit.
2. Press the STOP button twice and then press the MUTE button once.
3. The LED will extinguish.
TV Anywhere™
All manuals and user guides at all-guides.com
OR
15