Channel Summary - JVC AV-20420 Manuel D'instructions

Initial Setup

Channel Summary

Channel Summary allows you to customize the line-up of channels received by your TV.
You can add or delete channels from the line-up or prevent any unauthorized viewers from
watching any or all 181 channels.
Press the M
To CHANNEL SUMMARY
π †
è
To operate
The Channel Summary screen (right) will now be
displayed with the channels set to scan marked
with an "X". You can delete channels from the
scan by removing the "X". If any channels were
missed during Auto Tuner Setup and you wish to
add them, you may by placing an "X" next to the
channel number.
To the ADD column
π †
è
To include or delete from scan
E when finished
XIT
You can block access to a channel by activating the Channel Lock.
To CHANNEL SUMMARY
π †
è
To operate
To the Lock Column
π †
Z to lock or unlock that channel
ERO
E when finished
XIT
Channel Guard Message
When a viewer attempts to watch a guarded channel, the following message appears:
THIS CHANNEL IS LOCKED BY
CHANNEL GUARD.
PLEASE ENTER LOCK CODE BY
10 KEY PAD TO UNLOCK IT.
NO. - - - -
• Once a channel has been unlocked, it will remain unlocked until the television is turned off.
• See also "Set Lock Code", page 26.
18
button
ENU
�� ���
��
��
��
��
��
���������
����������
To watch a channel that you have locked, enter
the Lock Code using the 10 key pad.
If the wrong code is entered, the message
"INVALID LOCK CODE!" will flash on the screen:
The channel cannot be accessed until the
correct code is entered.
�� ���
�
��
�
� �
� ��
��
�
� �
��
�
�
��
�
��
���
��������������