Set Video Status - JVC AV-20420 Manuel D'instructions

Picture Adjust

Set Video Status

With Set Video Status, you can save your own set of picture quality adjustments as "Choice"
and have access to them at the touch of a button.
Press the M
To SET VIDEO STATUS
π †
è
To operate
è
To set the TINT levels
To move to the next option
π †
Repeat these steps until all levels are set.
To SAVE AS CHOICE
π †
è
To save settings and exit
• You must use SAVE AS CHOICE to exit the Set Video Status menu, otherwise your
preferences will not be saved.
• You can access your "Choice" settings at any time by pressing the V
the remote control.
Note:
The setting screen will disappear if you do not make any adjustments or move to the next
setting in approximately three seconds. Any changes you have made to picture settings up to
that point will be stored. You can exit the Picture Settings menu at any time by pressing the
E button on the remote control.
XIT
28
button
ENU
������� ���������������������������
������� ���������������������������
��������� ���������������������������
�������� ���������������������������
�������� ���������������������������
��������������
��������� ��
���
����������
IDEO
��������������
S button on
TATUS