Bond HYFP50025-1 Mode D'emploi page 8

ASSEMBLY INSTRUCTIONS
4. Attach steel base to the bottom part of the
table top (B) using 8pcs M6x8 screws (AA).
5. Insert the door (C) to right front leg and attach
door knob (DD) to the door using 1 M4 x 8 screw
(BB) and 1 washer (CC).
6. Attach hose of regulator to the bracket and then
tighten with the M4 x 10 wing screw (GG).
WARNING
The hose must be fixed in the bracket always,
otherwise may get touch with hot surface to
melt and cause fire.
Bond Manufacturing Co., Inc. | Page 8
AA
B
BB
CC
C
DD