4. INSTALLATION METHOD
4. Remove the upper part of the smart port
Insert a slot screwdriver into the slots in the
lower part of the smart port (2 places), and
remove the upper part of the smart port.
(Fig.4-5)
5. Fasten the back plate of the smart port.
For exposed mounting, fasten the back plate on the wall
with the 3 screws (M4×20) and plugs. (Fig.4-6)
Install the smart kit to the smart port. Insert the smart kit
with slightly strength into the main PCB of the smart port.
(Fig.4-7)
Back plate
Screws (M4×20)
Fig 4-6
44
Slots
Fig 4-5
Fig 4-7