Care & Cleaning; Cleaning Exterior Surfaces - BLAZE 42 Mode D'emploi

|
Care & Cleaning
Never put your hand into the vent hood while the unit is operating
♦
Turn off power to the hood before cleaning and trip the corresponding electrical
♦
breaker supplying the range hood
Make sure your cooking surface and hood are cool before cleaning
♦
Use only the types of cleaning solutions mentioned in this manual
♦
Completely dry the filter(s) immediately after cleaning
♦

cleaning exterior surfaces

Regular care will help preserve the appearance of your range hood
♦
Always wipe stainless steel surfaces with the grain to avoid scratches
♦
Clean periodically with hot soapy water and clean microfiber
♦
For heavier soil, use a liquid degreaser such as 409™ or Fantastic™
♦
If hood looks splotchy, use a stainless steel cleaner on the surface Promptly and gently
♦
remove cleaner with a soft towel or wipe
After cleaning, you may use non-abrasive stainless steel polish (such as 3m™ or ZEP™)
♦
to buff out the stainless luster Always scrub lightly and with a clean cotton cloth
DO NOT:
Use corrosive or abrasive detergent (eg, Comet Power Scrub™ or EZ-Off™ oven
♦
cleaner) Use steel wool or scouring pads, which will scratch and damage the
♦
stainless steel surface
Leak cleaning solution onto or into the control panel
♦
Allow deposits to accumulate or remain on the hood
♦
disinfectants, bleaches, or cleaning compounds to remain in contact with the
stainless steel for extended periods
9
Allow salt solutions,
♦
Care & Cleaning
When cleaning filters, always remove the
grease channels and clean with hot soapy
water Both the filters and the channels are
dishwasher safe Dry thoroughly beforere-
installing
USER MANUAL |
10