BLAZE 42 Mode D'emploi page 10

BLAZE OUTDOOR PRODUCTS
|
Step 5: Replace the Cover PLate
Next, re-install the cover plate with the
discharge in the horizontal position The
cover plate can be reattached with the
small screws
Step 6: attach the motor
Re-attach the motor to the cover plate
Start with the center screw, which was
the last screw removed when the
motor was disattached Once the
initial scerw is in place, attach the
remaining screws to hold the motor
onto the cover plate
Step 7: Secure loose cables
You will find some of the connecting cables now lying below the
motor Secure wires above motor and the rotation process is
complete Repeat same process for additional motor
USER MANUAL |