Mounting Kit - CDVI GALEO 2R Manuel D'installation

INSTALLATION MANUEL
GALEO
Illuminated Weatherproof Keypad with remote electronics
2] NOTES & RECOMMENDATIONS
Cable
The distance between the GALEO and the remote
electronic can not exceed more than 10 meters.
Make sure that the cable is not near by a high
voltage cables (ex: 230 V AC).
Recommended cable between
the GALEO and the remote electronic
2 twisted pairs (4 wires) SYT1 0.8MM.
Recommended power supplies
suitable for the GALEO
- ARD12 (230V input)
- BS60 (230V input)

3] MOUNTING KIT

3] MOUNTING KIT
Varistor
REMOTE
CONTROLLER
GALEO
(M4x10)
T20 Torx
®
Torx
Spanner
screw)
- - -
1 1 1
Mounting recommendations
Mount the keypad on a fl at surface to avoid
any vandalism and to insure the best mounting.
Security advice
For security advice reasons, change
the factory default master code.
When selecting a master code and user code
avoid sequencial codes (example : 3 4 5 6 7).
Back EMF protection
To secure the system from back electromagnetic
fi elds do not forget to mount the varistor
in parallel on the lock.
(M4x30)
®
Caps mounting
screws
- 2
2 2
Mounting
plate for
Wiring
Plastic
remote
anchors
sealed cap
electronic
2 2
2 -
cdvi.com
cdvigroup.com
box
1
-
3