Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION MANUEL
GALEO
Illuminated Weatherproof Keypad with remote electronics
H. SETTING A SUB MASTER CODE
The Sub Master code allows the user
to change its own code without entering
in programming mode. For security
reasons the code need to be changed
periodically. This feature makes it easier
and faster to change its code.
1. Enter the master code twice
(1 2 3 4 5 default value master code).
2 beeps are emitted to confi rm entry
in programming mode.
2. Press A7 to program a sub master
code for the user individual Pin
code modifi cation.
One beep is emitted. Enter the new
2-digit sub master code. One beep
is emitted to confi rm programming
of the sub master code.
3. Press B to exit from
the programming mode.
2 beeps are emitted to confi rm
that the keypad is in stand-by
operating mode.
I. Audible Feedback
The audible signal is enabled
in programming mode
and when the relay is energised
after a valid code.
To enable the audible feedback
on a key press:
1. Enter the master code twice
(1 2 3 4 5 default value master code).
2 beeps are emitted to confi rm entry
in programming mode.
2. Press AA.
One beep is emitted. Press 0 to disable
the audible signal during a keypress.
Press 1 to enable the audible signal
during a keypress. One beep confi rms
the new setting.
3. Press B to exit from programming.
2 beeps are emitted to confi rm exit
from programming mode.
cdvi.com
12
cdvigroup.com
J. OPTIONAL GALEO 2 AND GALEO 3
PROGRAMMING INSTRUCTION
Programming instructions are the same
as for the GALEO keypad with 1
relay output.
GALEO 2: 2 relay outputs N/O
GALEO 2
: 2 relay outputs N/O
and N/C contacts 8A @ 250V~.
and N/C contacts 8A @ 250V~.
Group 1: From user location 00
Group 1:
From user location 00
to user location 59 to activate relay 1.
to user location 59 to activate relay 1.
Group 2: from user location 60
Group 2:
from user location 60
to user location 99 to activate relay 2
to user location 99 to activate relay 2
Release Time of relay2 enter A2,
Release Time of relay2 enter
sub master code enter A8
sub master code enter
(default values 1 and 3).
(default values 1 and 3).
GALEO 3: 3 relay outputs N/O
GALEO 3:
3 relay outputs N/O
and N/C contacts 8A @ 250V~.
and N/C contacts 8A @ 250V~.
Group 1:
Group 1: from user location 00
from user location 00
to user location 59 to activate relay 1.
to user location 59 to activate relay 1.
Group 2:
Group 2: from user location 60
from user location 60
to user location 79 to activate relay 2.
to user location 79 to activate relay 2.
Group 3: from user location 80
Group 3:
from user location 80
to user location 99 to activate relay 3.
to user location 99 to activate relay 3.
Release time for relay 3 enter
Release time for relay 3 enter A3
sub master code enter A9
sub master code enter
(default values 4 and 6).
(default values 4 and 6).
A2,
A8
A3
A9
Publicité
Table des Matières
