Technical data (for power indications please see product overview)
Mechanical and
electrical safety
Directives and standards
Insulation
Switch
Intermittent operation
Materials
Test marks
Food contact
materials
Disposal
Manufacturer
4
EN 50564 : 2011
EN 55014-1 : 2018
EN 55014-2 : 2016
EN 60335-1 : 2010 + A1 : 2013 + A2 : 2016
EN 60335-2-14 : 2016
EN 61000-3-2 : 2018
EN 61000-3-3 : 2013 + A1 : 2017
EN 62233 : 2008
EN IEC 63000 : 2019
2014/35/EU
LVD
2014/30/EU
EMC
2011/65/EU
RoHS
2009/125/EG
Freamwork Directive
10/2011/EU
PIM
94/62/EG
Packing
2012/19/EU
WEEE
1935/2004 EG
FMC
Double insulation
Safety switch with pulse contact
max. 5 minutes at a time
All parts are made from rust-free, odourless and tasteless
materials that are resistant to corrosive foodstuffs.
www.tuev-sued.de/ps-zert.
We herewith certify that this product and its attachments
and accessories conform to the European Commission
Regulation No. 10/2011 on food contact materials.
It complies to all relevant statutory limits.
This product conforms to the European Directive 2012/19/EC
on waste electrical and electronic equipment – WEEE.
This Directive governs the disposal and recycling of such
equipment within the EU. For disposal instructions, please
contact your dealer or local authorities.
ESGE AG, Hauptstrasse 21, CH-9517 Mettlen/Schweiz
Made in Switzerland
All information in this document is subject to change without
prior notice. The above information might vary from country
to country.
www.bamix.com