Before Using; Checking Accessories; Preparing The Remote Control; Inserting Batteries Into The Remote Control - Pioneer DV-525 Mode D'emploi

Before Using

Checking Accessories

Please confirm that the following were received with the
player.
Audio cord
Video cord
Power cord
(European model)
Remote control unit
AA/R6P batteries
Operating instructions (this manual)
8
En
(UK model)

Preparing the Remote Control

Inserting batteries into the remote
control
1
While pushing the tab on the battery
compartment cover toward the center of the
remote, pull out in the direction indicated by
the arrow.
2
Insert batteries.
Make sure to match the plus (+) and minus
(–) polarity guides on the batteries with the marks
inside the battery compartment.
3
Close the cover.
Notes
• Do not mix old and new batteries.
• When replacing batteries, use all new batteries.
• When not using the remote control for a long period of time
(over 1 month), remove the batteries to avoid possible damage
from battery corrosion. If battery leakage occurs, wipe the
battery liquid from the battery component, then insert new
batteries.