Short Manual Zmz 0215; Settings; Running Time; Number Of Coins - NZR ZMZ 0205 Manuel

4. Short manual ZMZ 0215

4.1 Settings

For all settings the four buttons on side-
cut-out of terminal cover are used. Press
button „Betrieb" before and after every
change of settings. „Außer Betrieb" is
displayed after first pushing the button.
„Reset" follwed by version number of
software is displayed after pushing the
button in normal operation. All change-
able values can be displayed by multiple
pushing of button „Menü".
Depending on version the following
information are displayed:
„Zeit" (time)
„Münzen" (coins)
optional „Nachlauf" (lag)
optional „Vorlauf" (advance) (start delay)
optional „ext. Start"
optional „ext. Stop"
4.2 Setting of running time
Within the menu „Zeit" the cursor (underscore) can be scrolled to the position by
multiple pushing the button „Auswahl".
Push the button „Ändern" to set the value of basic time in HH : MM : SS.
Push the button „Betrieb" to return to operation mode or „Menü" for next setting.

4.3 Number of coins

Calling up the menu „Münzen" set the number of coins needed to start the device by
pushing the „Ändern" button. Refer to 4.2 for further settings.
NZR – Ihr Partner für Energiemessung
Einstellungen

(running time)

(number of coins)
(lag of 2 relay)
nd
(start with external button)
(stop with external button)
Münzprüfer
Prozessor
EPROM
Circuit board ZMZ 0215
15