Functional Description; Improper Use; Assembly Zmz 0205 / Zmz 0215; Short Manual Zmz 0205 - NZR ZMZ 0205 Manuel

1.2. Functional description

The ZMZ device family is used to bill various electrical consumers. Payment is made
by coins or tokens. The coin counter can be adjusted by the customer. You can set
the release time and the number of coins. After inserting the coins, the number of
coins entered appears on the display. At the same time the main relay switches on.
When the release time expires, the main relay switches off again.

1.2.1. Improper use

The product is not suitable for use in the food industry. The maximum switching
capacities or permissible currents of the respective relays / contactors must not be
exceeded. The switching of safety-critical consumers is not permitted.

1.3. Assembly ZMZ 0205 / ZMZ 0215

• Drill mounting holes according to dimensional sketch (Fig. 6 - Dimensional and
circuit diagrams)
• After opening the device and removing the connection cap, the device can be fixed
to the wall with the enclosed screws.
• It is essential to pay attention to vertical seating to ensure proper operation of the
coin validator.

2. Short manual ZMZ 0205

2.1 Settings

The ZMZ 0205 is equiped with a 1-digit LED to
display the number of inserted coins or remai-
ning time. Up to two coins can be insered into
the device at once.
Additional coins do not lengthen the
remaining time.
Afreshing of time can only occur after the termi-
nation of time. Time base can be switched from
HH:MM to MM:SS.

Delivery status

Jumper 1 open
only one coin will be accepted
Jumper 2 open
Upper Dip for setting of minutes
Lower Dip for setting of hours
NZR – Ihr Partner für Energiemessung
Circuit board ZMZ 0205
Münzenzählwerk
B B
1 2
1 2 4 8 16 32
Münzprüfer
Dip-oben
Dip-unten
13