Installing The Battery; Daylight Saving Time (Dst) / Summer Time; Setting The Date & Time - Electrohome CR35 Manuel De L'utilisateur

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

OPERATING INSTRUCTIONS

INSTALLING THE BATTERY

1.
Using a small Phillips Head screwdriver, remove the screw from the battery panel
on the bottom of the unit.
2.
Remove the battery compartment panel.
3.
Remove/properly dispose of depleted battery and replace with new, 3V, CR2032
Flat Lithium battery.
4.
Close the battery compartment and put screw into place to secure battery panel.
3V, CR2032 Battery
Philips Head Screw
Batteries must be installed by an adult.
Use only the recommended size and type of battery specified.
Please be sure to follow the correct polarity when installing the battery in the battery
compartment. A reversed battery may cause damage to the alarm clock.
When not using the unit for a prolonged period of time, please remove the batteries to
avoid possible damage caused by leaking batteries.
ATTENTION
When replacing the battery, do not disconnect the AC plug from the AC outlet. Current time and
alarm will be initialized.
Do not plug or unplug the power cable if you have wet hands.
If you are not planning to use the unit for an extended period of time, disconnect the power
cable from the wall outlet.
Do not pull on the cord! You may damage the power cord and may cause an electric shock
when disconnecting the power cord from the wall outlet. Pull firmly at the base of the plug.
All manuals and user guides at all-guides.com
- 12 -
OPERATING INSTRUCTIONS

DAYLIGHT SAVING TIME (DST) / SUMMER TIME

Daylight Saving Time/Summer Time is automatically preset.
Daylight saving time begins at: 2:00 AM on the second Sunday of March.
Standard time begins at: 2:00 AM on the first Sunday of November.
Cancelling / reactivating Automatic DST/Summer Time
1.
To cancel DST/Summer Time, press and hold the
2.
'OFF' will appear in the display to show that the Automatic DST/Summer Time adjustment is
cancelled. The display will return to the clock.
3.
To reactivate DST/Summer Time, press and hold the
4.
'ON' will appear in the display to show that the Automatic DST/Summer Time adjustment is
reactivated. The display will return to the clock.
The timing of Automatic DST/Summer Time employed by the unit (see above) is
subjected to variations by region and the law in each country/region. In such a case,
cancel the Automatic DST/Summer Time adjustment.
If you live in a country/region that has not introduced Daylight Saving Time/
Summer Time, you must cancel Automatic DST/Summer Time adjustment before
using the unit.
SETTING THE DATE & TIME
To change the Date/Time, press and hold the
following order:
Year > Month > Day > 12/24 H > Hour > Min
button for 3 seconds while the radio is OFF.
button for 3 seconds while the radio is OFF.
button. The settings below will appear in the
- 13 -

Publicité

Table des Matières
loading

Table des Matières