PACKAGING CONTENTS
•
Projection Dual Alarm Clock Radio with Auto Time Set
•
Backup Battery "CR2032"
•
Instructional Manual
ATTENTION
1.
Do not plug or unplug the power cable if you have wet hands.
2.
If you are not planning to use the unit for an extended period of time, disconnect
the power cable from the wall outlet.
3.
When disconnecting the power cord from the wall outlet. In order to avoid
damage to the power cord and electric shock, do not pull on the cord; pull firmly
at the base of the plug.
POWER CONNECTION
1.
Plug the AC power cord into a household AC outlet.
2.
Clock display will flash "3" indefinitely.
3.
Unit will go to Zone 3, which is the default setting, and correct time will
be displayed.
SETTING THE TIME ZONE (FACTORY PRESET TO ZONE "3"- EST)
Press the >> / YEAR / DST(18) or << / MONTH - DAY(17) to select time zone 1-6.Press
MODE (19) to confirm when the correct time zone appears on the display.
Zone 1 Newfoundland
Zone 2 Atlantic time
Zone 3 Eastern time
Change the time zone:
To change your time zone, press and hold the SNOOZE/SLEEP/TIME ZONE (3) button
for 3 seconds. The screen should start to flash. Select the corresponding number for
your time zone. 1 for Newfoundland, 2 for Atlantic time, 3 for Eastern time, 4 for Central
time, 5 for Mountain time and 6 for Pacific time.
SETTING DST – Daylight Savings Time
To turn on Daylight Saving Time, press and hold the >> / YEAR / DST (18) button for 5
seconds. The hour will adjust as necessary and a small sun icon will be displayed near
the top right of the hour.
RESET
The RESET(9) is located on the back of unit. Use a ballpoint pen to press it whenever
you change the batteries, or unit is not performing as expected. This will return all
settings to default value, you will lose any stored data (alarm and clock settings).
PRODUCT INFORMATION
OPERATING INSTRUCTIONS
Zone 4 Central time
Zone 5 Mountain time
Zone 6 Pacific time
- 8 -