Care And Maintenance; Accessories; Replacements - Leica ULTRAVID 8x32 BR Notice D'utilisation

17647 innen 18.05.2006

Care and maintenance

Your Leica Ultravid binoculars need no spe-
cial maintenance. Use a soft lens brush or a
blower to remove large particles of dirt, sand,
etc. To remove fingerprints etc., first wipe the
eyepiece and lens with a damp cloth, then dry
them with a piece of clean, soft chamois
leather or lint-free cloth. If the binoculars,
particularly the rotating eyecups, are very
dirty, simply rinse them under a running fau-
cet. Always rinse off salt water.
Moisture inside the central focusing unit
(visible through the scale window) will dry
quickest when the two rings (3/4) are
unlocked.
Attention!
Do not apply too much pressure when wiping
strongly soiled lens surfaces. Even though the
coating is very tough, sand and salt crystals
can cause scratches.
20
All manuals and user guides at all-guides.com
13:40 Uhr Seite 20

Accessories

Tripod adapter with 1 / 4
Floating carrying strap, orange . . . . . .42163

Replacements

Should you need replacements for your binoc-
ulars, such as eyecups, covers, or a strap,
please turn to our Customer Service depart-
ment or your national Leica agent. The
addresses are listed in the Warranty Card.
Order No.
" thread . . . . .42220