BIG ASS FANS FR127A-A2 Mode D'emploi page 27

Hang Fan
3
Raise the extension tube to the mount, and insert the extension
tube brackets between the mount brackets and the rubber
bushing so that the mounting holes are aligned. Secure the
extension tube with the mounting hardware (Fig. 3).
Fully tighten all hardware until the brackets slightly
compress the rubber bushing.
Fig. 3
Flat Washer
M8 Bolt
Brackets
Wiring Cover
Extension Tube
Wiring Cover Trim
HAIKU® BY BIG ASS FANS
Lock Washer
Split
M8 Nut
Pin
Secure Safety Cable
4
While supporting the fan, loop the safety cable around the
mounting bracket or building structure, and then secure it with
the shackle (Fig. 4).
Fig. 4
Safety
Cable
Canada: The safety cable must be secured directly
to an existing part of the building structure. It
may be necessary to install additional structural
material to provide attachment points.
Shackle
25