BIG ASS FANS FR127A-A2 Mode D'emploi page 26

Install Mounting Bracket
1
Seat the rubber bushing in the mounting bracket (Fig. 1).
Secure the mounting bracket to the mounting structure with
suitable hardware (Fig. 1). Your mounting structure may differ
from the illustration.
Fig. 1
Rubber
Bushing
Outlet box shown. Your mounting structure may differ from
the illustration.
24
Loosely install the mount brace brackets with the provided
hardware (Fig. 2). The bolt should be inserted in the middle
hole. Do not fully tighten the hardware.
Fig. 2
Mounting
Bracket
Suitable
Mounting
Hardware
Secure Mount Brace Brackets
2
M6 x 25 mm Screw
Mount Brace
Bracket (2)
REV. F
M6 Nut
| © 2018 BIG ASS FANS | ALL RIGHTS RESERVED