Keep your trolley under control: always keep your hand on the handle when driving
■
so you can stop or avoid objects in time.
Always park the trolley crosswise in steep terrain to prevent it from rolling away.
■
When crossing water hazards, make sure the axle is not immersed. If water gets into
■
the axle, the motor and electronics can be damaged.
Operating
LED display:
■
No light = no power/battery not plugged in
■
Slow flashing = power too low, charge battery!
■
Fast irregular flashing = standby, parking brake
■
active
To start: Press button A. The trolley will run at
■
the last speed selected.
To stop: Press button A. The automatic parking brake prevents the trolley from
■
rolling forward.
Release the parking brake (to push the trolley manually): Turn the knob back to zero
■
and press the Start/Stop button.
Activating the brake again: Press the Start/Stop button.
■
Distance timer (this function allows the trolley to drive on for 10 or 20 meters):
■
While the trolley is stationary, press button B for 3 seconds until the LED display
■
flashes quickly, then release it. The trolley will move forward for 10 meters
at the set speed.
While the trolley is stationary, press button B for at least 5 seconds until the LED
■
display flashes slowly, then release it. The trolley will move forward for 20 meters
at the set speed.
Setting the speed: Speed can be set variably by turning the potentiometer (cog C).
■
Turn in the direction of travel = faster
■
Turn backward = slower
■
Cleaning/Care/Storage
Clean the trolley with a damp cloth and/or compressed air. Avoid spraying it with water.
■
Always store the trolley in a dry location.
■
C
LED
A
B
21